Converting an Attached Garage in Tranent
Converting an Attached Garage in Tranent
Blog Article
Replacement Windows Fitted in Cockenzie and Port Seton
George Herkes & Son Joinery (Est. 1989), a family run joinery firm based in Tranent, East Lothian, covers window fitting in Cockenzie and Port Seton and the rest of East Lothian. The reveal, lintel and cill are checked before windows are ordered, and the making good is done by the same people who fit the frames.
Why do new windows still feel draughty?
Check the reveal, the lintel and the cill before anything is ordered. A frame forced into a moved opening shows a tapering reveal, so it is packed instead. George Herkes & Son Joinery (Est. 1989) finishes the internal facings, window boards and plaster itself.
The glass does its job, and the draught usually comes from round the frame. That joint to the masonry is filled and sealed inside and out. If you have bought the windows, the openings are surveyed before delivery.
Do I need permission to convert my garage into a room?
Often not planning permission, as many garage conversions fall within permitted development, but that depends on the property and on earlier changes. In Scotland building standards approval is still needed, because the garage is becoming a habitable room. The planning position is checked for your address by George Herkes & Son Joinery (Est. 1989), and building standards approval is handled with the conversion.
How is an opening measured for fitted joinery?
Nothing is priced by George Herkes & Son Joinery (Est. 1989) until the joiner in Elphinstone room has been surveyed. Each recess is read at three heights and two depths, with the tightest figure deciding the carcass. Plaster that has been skimmed over the years pulls an opening out of square.
Room for scribing to the wall is planned in from the first sketch. You see and agree the drawing before any board is cut, because that is when changing your mind is free.
Can fitted cupboards hide a meter or a stopcock?
Yes, and they should still let you reach it. With George Herkes & Son Joinery (Est. 1989), meters, stopcocks and consumer units sit behind panels that lift out. A new meter cupboard in a tight space is exactly the kind of job the firm is asked for.
The best spots are alcoves, the space under the stairs, landings and eaves. It is a survey, then the workshop, then usually one or two days in the house. Face frames are cut back against the plaster so the finished piece reads square.
George Herkes & Son Joinery (Est. 1989) surveys and quotes free of charge for window fitting in Cockenzie and Port Seton. Call 07860 211 815 for window fitting.
George Herkes & Son Joinery (Est. 1989)
14 Carlaverock Cl, Tranent EH33 2PP, United Kingdom
Phone: 07860 211 815
Website: ghsjoinery.co.uk
Bespoke joinery, kitchens, wardrobes and conversions, based in Tranent.